Bosch Part Number

CTA 500

ESI Reference Number

0

Vehicles and Applications

The CTA 500 is a floor mat used on many VW/Audi/Porsche vehicles equipped with Surround View Cameras. The CTA 500 can be deployed quickly and simply with the help of the guided tour on ADAS-enabled Bosch scan tools. 

• Floor mat measures 26.6' x 2.6'
• Robust vinyl material for safer calibration due to proper waves-free flatness of the mats
• Lateral clamping bar for easier rolling/unrolling
• Minimum floor space requirement (LxW): 29.5' x 16.4' or 9 x 5 m

Alignment method: manual with tape measure

Bosch Part Number

CTA 501

ESI Reference Number

0

Vehicles and Applications

The CTA 501 is a floor mat target for rear camera calibration on certain VW, Audi and Porsche vehicles. The CTA 501 integrates with the DAS 3000 vision positioning and the guided tour on ADAS-enabled Bosch scan tools for quick and easy placement.

• „Set made by floor mat 6.5' x 2.4' (1,970 x 742 mm) and L-shaped metal frame for proper alignment and setup by DAS 3000
• Robust vinyl material (500 g/m2) for safer calibration due to proper waves-free flatness of the mat„„
• Minimum floor space requirement (L x W): 29.5' x 9.8' or 9 x 3 m

Alignment method: Performed using the DAS 3000

Bosch Part Number

CTA 511

ESI Reference Number

0

Vehicles and Applications

The CTA 511 is a floor mat target for rear view camera calibration on certain Mercedes-Benz vehicles. The CTA 511 integrates with the DAS 3000 vision positioning and the guided tour on ADAS-enabled Bosch scan tools for quick and easy placement.

• „Set made by floor mat 6.5' x 2.4' (1,970 x 742 mm) and L-shaped metal frame for proper alignment and setup by DAS 3000
• Robust vinyl material (500 g/m2) for safer calibration due to proper waves-free flatness of the mat
• Minimum floor space requirement (L x W): 29.5' x 9.8' or 9 x 3 m

Alignment method: Performed using the DAS 3000

Bosch Part Number

CTA 520

ESI Reference Number

0

Vehicles and Applications

Floor mat target to calibrate surround view and 360 view camera systems on Ford vehicles

Bosch Part Number

CTA 531

ESI Reference Number

0

Vehicles and Applications

Floor mat target to calibrate surround view and 360 view camera systems on General Motors vehicles.

Bosch Part Number

CTA 542

ESI Reference Number

0

Vehicles and Applications

Floor mat target used to calibrate surround view on Acura and Honda vehicles.

Bosch Part Number

CTA 550

ESI Reference Number

0

Vehicles and Applications

Floor mat target to calibrate surround view and 360 view camera systems on Mitsubishi vehicles.

Bosch Part Number

CTA 561

ESI Reference Number

0

Vehicles and Applications

Floor mat target to calibrate surround view and 360 view camera systems on Nissan vehicles.

Bosch Part Number

DAS3000-1

ESI Reference Number

0

Vehicles and Applications

The DAS3000-1 ADAS Recalibration System is a complete solution that enables shops to recalibrate vehicle camera and radar systems with confidence, speed, efficiency, precision and a vision for the future.

• DAS 3000 Recalibration fixture precisely holds the radar reflector and camera targets for sensor recalibration. 
  • Robust camera targets with integrated storage box makes finding the proper target easy and helps maintain the integrity and serviceability of the targets. Conveniently stored in the calibration unit keeps your work area organized.
  • Innovative, dual purpose VW camera board is also a Universal OEM radar reflector, a specially designed target board for calibrating both radar systems as well as Volkswagen cameras
  • State-of-the-art distance and wheel hub thrust angle alignment markers are used by the systems guided instruction to efficiently direct the user to place and align the fixture to the vehicle for the most accurate calibration
• Surround view floor mat targets support multiple OEM’s
• Leading edge Bosch ADAS Positioning System (BAP) utilizes technology and industrial-grade vision sensors to measure the distance and angles of the fixture, in relation to the vehicle, providing the most precise measurements ensuring the exact target positioning required for the most accurate calibration.
• SCT 815 Radar Reflector: Universal OEM cone reflector target and carrier for calibration of front, corner and rear radar sensors. Laser technology helps to align the SCT 815 for precise and effective calibration. Constructed with fiberglass material to avoid false and improper radar calibration, carrier designed to connect future targets and alignment technologies. Suited for Kia, Hyundai, Mazda, Toyota / Lexus and Honda vehicle recalibrations.
• ADS 625X with ADAS Recalibration Software Package: Control the vehicle specific calibration and adjustment procedures with guided instruction
• The guided instructions walks users through commonized, simplified recalibration procedures including setting up the fixture, target selections and sensor recalibration compatible with the unique requirements of OEM makes and models. These commonized procedures reduce the number to a fraction of OE set-up variations and the complexity of ADAS recalibrations
• The DAS 3000 is designed to be upgradable to accommodate future sensor calibration technologies, enabling shops to take on the challenge of future technologies

Technical Support

12 months of Enhanced ADAS support is included with the DAS 3000-1 Master Kit. The DAS 3000 has been designed with the technician in mind and is incredibly easy to use. However, we know that even the best of us get stumped once in a while. That is why the DAS 3000-1 includes a full 12 months of Enhanced ADAS Support from our professionally-trained ADAS technical support team. Our technical support team can answer questions, troubleshoot and assist virtually with issues relating to ADAS calibrations. The Enhanced ADAS Support can be extended for an additional 12 month. Even without the Enhanced ADAS Support package, our technical support team will still be available to advise and help with questions related to the scan tool and the DAS 3000 hardware. However, the Enhanced ADAS Support goes beyond just the scan tool. Our ADAS team can provide remote assistance to troubleshoot ADAS calibration issues and recommend solutions to help get the job done.

The Enhanced ADAS Support team can be reached at: Tel: 1-888-812-3275 techsupport.diagnostics@us.bosch.com

Virtual Training Included

Bosch is committed to not only providing the best recalibration equipment, but also helping shops use that equipment to its fullest. With the purchase of the DAS 3000, users can register for virtual training hosted by the Bosch technical training team. This interactive training class is designed to get you started recalibrating ADAS functions using your DAS 3000 ADAS Recalibration System.

The training will include:

• ADAS Systems and Technology
• DAS 3000 Overview
• ADAS Calibration Process
• Q&A session

Once you have registered your DAS 3000, you will receive a training registration link where you can select your preferred date and time to attend the virtual training event. Training sessions will be recorded and made available for reference.

Bosch Part Number

DAS3000-3

ESI Reference Number

0

Vehicles and Applications

The DAS 3000 ADAS Calibration Solution is a complete solution that enables shops to calibrate vehicle camera and radar systems with confidence, speed, efficiency, precision, and a vision for the future.

• The DAS 3000 Calibration fixture precisely holds the radar reflector and camera targets for sensor calibration.
• Robust camera targets with an integrated storage box make finding the proper target easy and help maintain the integrity and serviceability of the targets. Conveniently stored in the calibration unit, they keep your work area organized.
• The innovative, dual-purpose VW camera board is also a universal OEM radar reflector, a specially designed target board for calibrating both radar systems and Volkswagen cameras.
• State-of-the-art distance and wheel hub thrust angle alignment markers are used by the system's guided instructions to efficiently direct the user to place and align the fixture to the vehicle for the most accurate calibration.
• Surround view floor mat targets support multiple OEMs.
• The leading-edge Bosch ADAS Positioning System (BAP) utilizes technology and industrial-grade vision sensors to measure the distance and angles of the fixture in relation to the vehicle, providing the most precise measurements and ensuring the exact target positioning required for the most accurate calibration.
• CTA 120 Radar Reflector: Universal OEM cone reflector target and carrier for calibration of front, corner, and rear radar sensors. Vision positioning using the DAS 3000 fixture ensures precise and effective calibration. Constructed with fiberglass material to avoid false and improper radar calibration, the carrier is designed to connect future targets and alignment technologies. It is suited for Kia, Hyundai, Mazda, Toyota/Lexus, and Honda vehicle recalibrations.
• Works with ADS 10X Plus (sold separately) with the ADAS Calibration Software Package: Control the vehicle-specific calibration and adjustment procedures with guided instructions.
• The guided instructions walk users through common, simplified calibration procedures, including setting up the fixture, target selections, and sensor calibration compatible with the unique requirements of OEM makes and models. These common procedures reduce the number to a fraction of OE setup variations and the complexity of ADAS calibrations.
• The DAS 3000 is designed to be upgradable to accommodate future sensor calibration technologies, enabling shops to take on the challenge of future technologies.

 

Set-up, Training and Support

White Glove On-site Setup and Installation: Bosch is committed to not only providing the best calibration equipment, but also helping shops use that equipment to its fullest. Where available, on-site set-up and product training is offered for shops with the purchase of the DAS 3000. An authorized Bosch field representative will unpack, assemble and provide instruction on the use of the DAS 3000 for ADAS calibrations, including the most common calibration procedures. Contact your local Bosch field representative for more information on scheduling on-site set-up and training.

Online Training Courses: Registered users will also receive one year of access to a 4-part technical ADAS training via the Bosch Automotive Training Solutions (BATS). This 4-hour training course will cover topics such as the foundational concepts of ADAS, ADAS features, components and systems overviews as well as DAS 3000-specific topics related to ADAS calibration. Registered users will also have to access other training content within the BATS portfolio. Bosch ADS 10X Plus scan tool upgrade with included ADAS software subscription card required to activate access.

ADAS Technical Support is included: While the DAS 3000 offers an intuitive user experience, ADAS support is readily available to assist technicians. Our professionally trained, multilingual ADAS technical support team can answer questions, troubleshoot, and assist virtually with issues relating to ADAS calibrations. Furthermore, our team offers support for the DAS 3000 hardware and scan tool functionality, ensuring users have the resources needed to efficiently and effectively complete their tasks. Our ADAS team can also provide remote assistance to troubleshoot ADAS calibration issues and recommend solutions to help get the job done. The ADAS Support team can be reached at: Tel: 1-888-812-3275 or techsupport.diagnostics@us.bosch.com